Shaowei Cui
Publications
TacPrint: A Wearable Fingertip Tactile Sensor for Human-to-Robot Contact Reproduction
Human-centric data collection is emerging as a significant paradigm for robot skill acquisition, but seamlessly integrating low-cost, scalable tactile sensing systems that capture fine-grained fingertip interactions without compromising natural operation remains a key challenge. This reduces the reliability of human-to-robot transfer in contact-rich tasks. In this work, we present TacPrint, a wearable fingertip tactile sensor, where protrusions on the inner surface of the silicone skin are aligned one-to-one with 24 capacitive taxels to enable localized capacitive responses. A real-to-sim-to-real pipeline estimates a 35 $\times$ 26 contact-depth map from 24-channel capacitive signals. Against simulation-generated labels, the model achieved a contact-region RMSE of 0.223 $\pm$ 0.161 mm, a weighted-centroid error of 1.213 $\pm$ 2.379 pixels, and an IoU of 0.829 $\pm$ 0.169. With measured capacitive inputs, the network-predicted depth evaluated at the guide-calibrated contact center showed a mean absolute error of 0.085 $\pm$ 0.057 mm across all 40 controlled trials, while the mean contact-position error was 0.250 $\pm$ 0.208 mm across the 37 trials whose reference contact regions were not truncated by the sensing boundary. In human-to-robot replay, tactile-guided compensation increased grasping and wiping success rates from 0% to 91.67% and 90%, respectively. In closed-loop grasping, dense-depth feedback achieved success rates of 87.5% over all tested positions and 85% under edge-contact conditions, compared with 67.5% and 45% for raw-taxel feedback.
FeelWorld: Visuo-Tactile World Model for Hierarchical Contact Prediction and Planning
Humans plan physical interactions by imagining the possible outcomes of candidate actions. However, existing visual world models primarily capture appearance dynamics while overlooking the tactile states that govern contact-rich interactions, potentially producing imagined futures that appear visually plausible but violate physical dynamics. We introduce FeelWorld, a hierarchical visuo-tactile world model that jointly predicts future visual latents and three tactile states. FeelWorld organizes these states hierarchically as contact state, a 3D tactile latent that encodes force-related information, and slip state. These states are jointly predicted by a shared latent dynamics model with explicit supervision. To prevent irrelevant tactile signals during free-space motion from degrading visual prediction, we introduce a contact-gated asymmetric attention mechanism that maintains a visual-only prediction pathway before contact and enables joint visuo-tactile dynamics prediction during contact. The model is further trained with autoregressive rollouts and context noise injection to improve robustness to compounding errors. The predicted contact and slip states also support contact-aware CEM planning. Experiments on chip grasping, fruit grasping, and USB insertion show that FeelWorld reduces 10-step LPIPS from 0.084 to 0.058 and maintains an LPIPS that is 61% lower than that of the visual baseline after an 80-step autoregressive rollout. FeelWorld also achieves an average zero-shot planning success rate of 81.7%, providing an effective approach for incorporating tactile sensing into world models.